Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
AVANTOR MASTERFLEX (VWR LLC) TUBING MFLEX PHARMAPUR 82 25FT
Masterflex I/P Precision Pump Tubing, PharmaPure, I/P 82; 25 ft, Avantor
Accuflow Systems TBNG MFLEX TYGON E-LAB#17 50FT
Manufactured by Cole Parmer & sold by Accuflow. Masterflex Tygon E-Lab (E-3603) Pump Tubing, L/S 17, 50 ft. Specifications: Product Type Pump Tubing Tubing formulation - Tygon E-Lab (E-3603) Pump Series - L/S Masterflex tubing size (L/S) - 17 Tubing ID (
AVANTOR MASTERFLEX (VWR LLC) 3-STP PHARMED 0.38MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, PharMed BPT, 0.38 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING C-FLEX 0.25MMID 50FT
Masterflex Ismatec Pump Tubing, C-Flex, 0.25 mm ID; 50 ft, Avantor
AVANTOR MASTERFLEX (VWR LLC) 3-STP PHARMED 1.65MMID 12PK
Masterflex Ismatec Pump Tubing, 3-Stop, PharMed BPT, 1.65 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TBNG TYGON 2001 1.52MM ID 33FT
Masterflex Ismatec Pump Tubing, Versilon™ 2001, 1.52 mm ID x 3.22 mm OD; 33 ft, Avantor
Glass Expansion Tygon Tubing 1/4 inch x 1m
Tygon Tubing 1/4 inch x 1m. A 1 meter length of 1/4 inch Tygon tubing. Compatible with GAZ-08. An example of use is as a soft walled transfer tube between Glass Expansion’s IsoMist (e.g., KT-1064-XR) spray chamber and ICP torch using GazFit Connector 8mm (GAZ-08) and a Glass Ball Cup Adaptor FS13 (70-803-0571).Glass Expansion is ISO 9001:2015 certified by AB Certification, No. AU4501-9001
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, PFA, 11/16""ID"" ID x 3/4"" OD; 25 ft
Applications: Demanding lab, chemical, electrical, mechanical, pharmaceutical, and automotive applications. For the transfer of high-temperature or highly corrosive materials. Also good for high-purity work. Characteristics: Chemically inert, nontoxic, and virtually nonporous. Excellent crack- and stress-resistance. Low coefficient of friction. Translucent. Resin certification: Resin is FDA-compliant (21 CFR 177.1550); meets USP Class VI requirements. Tubing is manufactured according to GMP. Temperature range: -320 to 500¿F (-195 to 260¿C) Sterilize: Autoclave, ethylene oxide, or use dry heat.
Grainger Hose Fitting Sleeve 1/2 In
The Aeroquip Compression Sleeve Brass is a brass compression sleeve fitting used for connecting tubing in fluid power systems. It has a 0.25 inch tube size and is made from brass for durability and corrosion resistance. This compression sleeve has a maximum pressure rating of 5000 psi and temperature range of -65 to 300 degrees Fahrenheit. The fitting accepts 0.25 inch OD tubing and uses a ferrule and nut to form a secure, leak-free connection when properly installed. This brass compression sleeve fitting is ideal for use in hydraulic, pneumatic, lubrication, fuel and oil applications.